Cooling Water Treatment for Mission-Critical Facilities

Protect uptime, eliminate Legionella risk, and meet sustainability goals—with a single treatment that replaces your entire chemical program.

NSF/ANSI 60 Certified Legionella Control ESG Compliant Non-Toxic Residuals

Cooling Towers: The Achilles Heel of Data Centers

Data centers consume up to 5 million gallons of water daily for cooling—and that water flows through cooling towers where biofilm, scale, and Legionella thrive. A single cooling system failure can cascade into millions in downtime costs and SLA penalties.

Traditional water treatment requires juggling 4–6 different chemicals: biocides, scale inhibitors, corrosion inhibitors, pH adjusters, and dispersants. Each adds complexity, cost, and potential failure points to your operation.

  • Legionella liability—outbreaks trigger lawsuits, shutdowns, and reputational damage
  • Biofilm reduces heat transfer efficiency by up to 30%
  • Scale buildup forces higher energy consumption and equipment strain
  • Multi-chemical programs require constant monitoring and adjustment
  • ESG scrutiny over water usage, chemical discharge, and sustainability
Data Center Shut Down

The True Cost of Cooling Water Failures

$300K–$1M+
Cost per hour of unplanned downtime
30%
Efficiency loss from biofilm-fouled heat exchangers
40–50%
Of total facility water used by cooling towers
$2–5M+
Legionella outbreak litigation & remediation
Data Center Running Cool

One Product. Complete Protection.

HydroTreat™ uses proprietary mineral oxychloride technology to generate Reactive Oxygen Species (ROS)—including hydroxyl radicals—that penetrate and destroy biofilm, eliminate Legionella, and prevent scale formation in a single treatment.

Unlike traditional biocides that only kill surface-level bacteria, HydroTreat’s ROS penetrate deep into the biofilm matrix, breaking down the protective structure and destroying the pathogens within. The result: cleaner heat transfer surfaces, lower energy consumption, and dramatically reduced biological risk.

HydroTreat continuously regenerates ROS, providing persistent residual protection that prevents recontamination—even in warm, nutrient-rich cooling tower environments.

Replace 4–6 chemical products with one. Simplify operations, reduce vendor complexity, and eliminate the risk of chemical incompatibility or dosing errors.

99.9%+
Legionella elimination
12–24×
More effective than chlorine
<10 sec
Pathogen kill time
1
Product replaces 4–6 chemicals

Where HydroTreat Works

Comprehensive protection across your entire cooling water system.

Cooling Towers
Chillers
Heat Exchangers
Condenser Systems
Makeup Water Lines
Blowdown Systems
Basin & Sumps
Distribution Piping
Evaporative Coolers

Why Data Centers Choose HydroTreat

🛡️

Legionella Elimination

ROS technology destroys Legionella pneumophila in seconds—penetrating biofilm where traditional biocides can’t reach.

Improved Heat Transfer

Biofilm-free surfaces restore heat exchanger efficiency, reducing energy consumption and cooling costs.

🔄

Higher Cycles of Concentration

Improved water quality allows higher COC, reducing makeup water requirements and blowdown volume.

🧪

Simplified Chemistry

One product replaces biocides, scale inhibitors, and corrosion inhibitors. Fewer chemicals, fewer vendors, fewer risks.

🌱

ESG & Sustainability

Non-toxic residuals break down to oxygen and mineral monoxides. No carcinogenic byproducts, no hazardous discharge.

💧

Water Conservation

Reduced blowdown and higher COC directly improve Water Usage Effectiveness (WUE) metrics.

⏱️

Uptime Protection

Continuous ROS regeneration provides 24/7 protection against the biological and chemical threats that cause cooling failures.

🔧

Extended Equipment Life

Biofilm and scale prevention reduces corrosion and mechanical wear on pumps, fills, and heat exchange surfaces.

NSF/ANSI 60 Certified

Safe for cooling water applications with documented efficacy against the pathogens that matter most.

/* Comparison Section */

Traditional Treatment vs. HydroTreat

Data center cooling water programs typically require multiple chemical products, each with its own dosing requirements, storage needs, and vendor relationships. HydroTreat consolidates protection into a single, more effective treatment.

Factor Traditional Program HydroTreat™
Products Required 4–6 (biocide, scale inhibitor, corrosion inhibitor, pH adjuster, dispersant) 1
Biofilm Penetration Surface-level only Full matrix penetration
Legionella Kill Time Minutes to hours <10 seconds
Residual Protection Dissipates quickly Continuous ROS regeneration
Chemical Storage Multiple containers, SDS management Single product
Discharge Concerns Regulated chemicals, DBP formation Non-toxic breakdown products
Oxidation Potential 1.36 eV (chlorine) 2.6–2.8 eV (hydroxyl radical level)

Oxidation Potential Comparison

HydroTreat™ delivers hydroxyl-radical-level oxidation power—significantly more effective than the chlorine-based biocides used in most cooling tower programs.

Oxidizing Reagent Potential (eV)
Hydroxyl Radical (OH⁻) 2.6–2.8
Mineral Oxychloride (HydroTreat™) 2.6–2.8
Ozone (O₃) 2.04–2.07
Permanganate (MnO₄) 1.67
Hypochlorous Acid (HOCl) 1.49
Chlorine Gas (Cl₂) 1.36
Chlorine Dioxide (ClO₂) 0.95

Ready to Optimize Your Cooling Tower Performance?

Let’s discuss how HydroTreat can reduce costs, improve efficiency, and simplify your water treatment program.

Talk to Our Team Read the White Paper